The Classic Canoe

Several thousand years ago somebody dragged a Cedar      tree out of the forest and proceeded to dig the wood out of it to make it hollow inClassic Canoe the middle. He created the first dug out canoe.

For the time it was a very convenient way to make a vessel to transport himself for long distances over the water. He did not have the advantage of today’s technology so he was not aware of and totally unconcerned about the hydrostatics and hydrodynamics of the hull he created.

Canoe hulls were manufactured in this fashion for many thousands of years and were improved upon as all things will be as time goes by. At some point in time a new method was found to make a much lighter and more manageable vessel…the birch bark canoe and it’s derivatives were born.

The shape of the hull however stayed the same symmetrical shape of the hollowed out log, once again with no regard to hydrodynamics. The shape of a tree trunk became the traditional shape for even modern canoes of aluminum and plastic, simply because that shape had been used for eons. It is almost unbelievable that that with today’s technology, canoes are still being manufactured with little regard for the hydrodynamics of modern hull shapes.

Compumarine’s Classic Canoe hull has the shape that all displacement hulls should have.  Displacement hulls are those hulls that are designed to move through the water, not on top of it like a power boat’s planing hull form.

There are several key features to the modern shape of a displacement hull….a sharp angle of entry at the bow sections, the greatest depth of hull just forward of the midship section at approximately station four, the center of displacement just aft of the midship section at approximately station six, and the greatest width of      the hull a little further aft at approximately station seven. As the hull moves through the water it parts the water gently, then after it has been displaced past the center of displacement the water flow past the hull then closes quickly creating the least amount of turbulence and the least possible amount of drag. This hull shape produces the least amount of friction to the flow of water around the hull of a displacement type boat.

Lots of dollars have been invested over many years on computer research and tank testing by Naval Architects to determine the proper shape of displacement hulls for America’s Cup sailboat racing and for many other displacement type hulls. The basic features of the shape that has resulted from all this research, is the      ultimate shape for any displacement hull from a two foot model to a hundred foot sailboat or any size in between. Obviously there are many differences in beam widths, drafts, displacements, waterline lengths bow and stern shapes for different types of displacement craft but the basic features of this asymmetrical shape should apply. This is the shape that is designed into all of Compumarine’s displacement type hulls including the Classic Canoe.

The Classic Canoe plans package includes full size patterns for station molds, the stem and stern pieces. Specifications are provided to allow you to build the hull in your selected length from 12 to 21 feet. Cedar strip/epoxy construction is the ideal technique  for amateur boat builders.  With just a few hand and Power Tools anyone can build their very own “work of Art” with little or no wood working experience.It is easy to glue 1/4″ x 3/4″ cedar strips together over a simple set of plywood or particle board molds that you have cut out with a hand held jigsaw. Give it a try! It is a lot of fun to build your own hull and the satisfaction you receive.


Payment Form

Enter the payment details and submit

Payment for: The Classic Canoe

Amount: $139

Waiting for PayPal...
Validating payment information...
Waiting for PayPal...

After placing your order, please send your current shipping address to Compumarine by email. Send to compumarine@hotmail.com    Thank You.

6 thoughts on “The Classic Canoe

  1. Reviewing your site and trying to look at the line drawing for the Classic Canoe.
    The 404 error comes up and won’t display . Do you have any suggestions on getting them to come up?
    Really like the design concept and want to build a solo canoe. Primarily looking for the weight capacity of the canoe in the 12′ length.
    Do you have any pictures showing trimmed units?
    Thank you!
    Ron

    1. Hello Ron…When I could no longer use the website I had before for years, I went to a WordPress website and lost all my previous photos. Unfortunately, I no longer have the finished photos of the Classic Canoe. I don’t have the lines drawings on the website. The load capacity of the 12″ Classic Canoe is 530 pounds.

  2. Sold my Classic Dinghy and the Harbor Freight folding trailer I designed for it using the auction “Everything but the House”. I has a new home on a Kentucky lake with a family with kids and a dog.

    Of course you never get out of the sale the hours, time and love that went into the endeavor. Can you do any better on the price of the canoe plans?

    1. Hello Alan…Since you are a previous customer I will sell you a set of Classic Canoe plans for $100. You will need to send me a check however because my PayPal account is not set up to collect that amount. Thanks for being my previous customer…John

  3. John I purchased the classic canoe plans about 5 years ago and finally got around to building them. I am constructing a 16 and a 13 footer. I built a couple of Kayaks and 2 rowing boats from New Found prior to these canoes. If you could give me a call I would like to pay for the additional canoe and order the brass ID plates.
    Best number to reach me at is my cell, 518-378-5187.
    I could use the hull id as soon as you can so I can put it under the fiberglass on the aft starboard side as per USCG directives.

    1. Hello John…The price for the ID Plates has increased to $60 each since I published the manual. Let me know if you are still interested. Thanks…John

Leave a Reply to John Clark Cancel reply

Your email address will not be published. Required fields are marked *

*